The Deadlywind Fibur-X carbon fiber barrels are ultra-lightweight, accurate, and quiet. They utilize Freak inserts, so one barrel and a few inserts will do the job of multiple barrels. And with the ability to affordably swap to different threads, the Fibur-X has you covered!
The Fibur-X barrel system consists of three parts: The thread adapter to match your thread type; a carbon fiber Main Barrel which is the main part of the barrel (sets the total length); and a Freak insert which sets the bore size of the barrel.
Weighing in at an average 64 grams (77 grams with insert), the Fibur-X is 2x to 4x lighter than other replaceable insert barrels. And it is strong enough to be driven over with a car. Yes, we have done it, and we do not suggest you try it on purpose!
Unlike other carbon fiber barrels the Fibur-X barrel is built with a unique 3 layer construction. A 2x2 satin twill external, uni-direction fibers laid up in a strong multi-vector pattern, and then a super slick "Silkfiber" inside that can be safely swabbed. CNC align-bored segment for the insert area, CNC-ported with 3 rows of straight ports, and then hand-assembled and quality checked - You can't get any more accurate.
Already have inserts? Awesome! Need an insert to go with it? Buy one or go with the full set and save!
Already have a Fibur-X for your Tippmann A5 or Phenom and want to use it on your new Autococker-threaded marker? Pick up a Fibur-X Autococker thread adapter and you're good to go.
Already have a 12" Fibur-X and want to try a 16"? Get just the longer Fibur-X Main Barrel and you're set.
We use LEFTY threads to join the Main Barrel to the Thread Adapter so no more adapters getting stuck in your marker!
You must have at least a Thread Adapter, a Main Barrel, and a Freak insert to use this barrel system.