Finally an alternative feeding system for the Tippmann X7/Phenom! Now with this Aluminum Adapter by Flasc Paintball you can mount a BT Rip Clip on your Tippmann X7 and have all the advantages of this Halo Powered loader! No upgrades required for maximum performance are ever required as the Rip Clip performs right out of the box at 20+ BPS, The Rip Clip also works great in all weather both cold and hot and your markers operating pressure will not have any negative effect on your feed system. Not to mention you will not be using air to feed your paintballs so you will find a small efficiency boost due to saved air, and if you run a Response Trigger on you're X-7 it will no longer have to share air with the cyclone feed system so you can also expect its performance to increase in some cases also!, the Rip Clip also has a spring tension feature as well as a rip drive to pre load your next few shots as well as to give you a feature to manually load several shots at a time if you run out of batteries!
The Rip Clip allows use of all the same loaders as the stock Cyclone feeder so you don't even have to change out your hopper! This is a great option for an extremely reliable alternative feeding system for the Tippmann X-7!
Durable Aluminum Rip-Clip Adapter for the X7/Phenom
Requires NO Upgrades for higher rates of fire
Note: The Flasc Paintball Rip Clip adapter requires removal of the hook from the side of the body to function - BT Rip Clip sold separately
BT makes 3 versions of the Rip Clip - The BT-4, Tippmann 98 and TM series, while both the BT-4 or TM series will fit and work, and while the BT-4 version will work for most people with a Phenom we recommend using the TM series Rip Clip with the Phenom for best performance.