|
|
|
|
Venom Pack Upgrade
So
you just bought a gun but realized that won't do you much good without
everything else you need to work the darn thing. So you hop in your car
and make your way to your local "paintball" shop only to realize that
it's going to be about $100 more just to make your gun shoot. Why put
yourself through all that when you know Hustle Paintball has a way to
get you out of all those bad paintball situations? Buy a package upgrade
for your marker, all you need, at once, for less than you would spend
buying them all separately. What a relief...we know.
Package Contains:
- Guerrilla Air 20 oz. CO2 Tank
- Java V-Type Mask
- GxG 200 Round Hopper
- GxG 4+1 Harness
- (4) 140 Round Metallic Smoke Pods
- Pathogen Remote Coil
Guerrilla Air 20 ounce CO2 Tank
For
use in paintball, a CO2 tank is fairly simple, consisting of an
aluminum cylinder and a pin valve (usually brass). The pin valve
depresses when you screw the CO2 tank in to your paintball gun, allowing
a free flow of unregulated CO2 into the gun (usually about 800psi).
Many guns use a simple valve system to control the gas flow and fire
paintballs, but more and more, paintball guns are being sold with
regulators, to better control the consistency and pressure level of the
gas inside the marker. These CO2 tanks have several safety features, as
well.
Features:
- 1800psi
Burst Disk - If the pressure inside the CO2 tank exceeds 1800psi, a
burst disk will safely release all the air out to prevent a possible
rupture. Possible causes would be leaving your tank in direct sunlight,
allowing the gas to expand.
- Excessively strong aluminum cylinder
- These tanks are rated at over 3000psi rupture ratings. Long before
pressure inside the tank could reach a dangerous level, the 1800psi
burst disk will release the pressure out.
- Simply screw the CO2 tank into your paintball gun, and you're ready to go
- Note
- CO2 tanks are not recommended for electro-pneumatic paintball guns.
If you have questions regarding what tank you should purchase for your
paintball gun, please give Hustle Paintball a call.
Java V-Type Mask
Hustle
Paintball offers a full line of paintball masks, each one specifically
designed to fit an exact need in the industry. Whatever your
requirements are, whether they are tournament, scenario, recreational or
tactical, Hustle Paintball has a goggle with your name on it.
Still
though, there are masks, and there are masks. The V-Type takes it to
the next level. This mask is a stealth dark carbon grey color. It's much
more comfortable than your standard mask.
Features:
- Anti-Scratch Treated Lens
- Dual Anti-Fog coating
- Extended face guard for added protection
- Flexible lower mask for comfort
- 190-degree field of view
- Dual density foam for extra comfort
- Hed-Lok system
- Meets or exceeds all ASTM standards
- Visor not included
Paintball Hopper 200 round
A Fast Feeding Hopper without the batteries saves you money!
This
holds a full 200 rounds of paint and feeds it fast without jamming or
batteries. This new design will change the future of paintball hoppers.
There are no moving parts to break, no batteries to buy, no motor to
burn up, no electronics to go bad.
Try out this new hopper for yourself and you'll feel the difference.
GxG 4+1 Harness with (4) Pods
The
4+1 pack is constructed of tough materials to withstand all of the
abuse that you can dish out. The stealth black color ensures that you
will escape detection in any environment. It has a low profile design
has horizontal pods that don't stand up when you're leaning out of a
bunker. Forget the days of getting tagged in your pod tip, because
you've gone low profile!
The pods are awesome - they can take a
beating and laugh at you. Manufactured out of tough plastic, they have
great lids that snap shut securely and pop open with ease. Unlike the
pods that have "finger grooves," these pods have a tab on the lid that
allows you to pop them open easily. Those "finger grooves" we talked
about earlier should have been called "finger guillotines" - lucky these
pods don't have them, so you'll be able to keep all the blood in your
body.
Comes in Black and now Woodland Camo!
Hustle Note: Does NOT come with remote coil or tank unless clearly stated otherwise.
Heavy Duty Pathogen Coiled Remote with Quick-Disconnect
This
heavy duty Pathogen remote is the step up from any other remote on
eBay. You'll see other sellers with the "heli coil" and "micro coil"
remote, both of which are just awful quality with low burst pressures.
But more likely than the remotes bursting, you face issues like poorly
machined hard parts (like the ASA and quick disconnects), low-quality
o-rings in the Quick Disconnect Nipple (a rampant problem in other
sellers' remote coils - something that's not very easy to fix, either).
Hustle Paintball's remotes are guaranteed to work, or we'll replace it
for you.
These heavy duty remotes have a working pressure so high
(3500psi) that your tank's burst disk (safety feature) or a fitting on
your paintball gun will fail LONG before one of these remotes has any
problems.
Play in rough, thorny woods, toss it on the ground, or run over it - it just doesn't matter, these remotes are indestructible.
Oh
yeah - and don't believe the hype about some remotes "cutting off air
to your marker." These aren't garden hoses, which can easily be kinked.
These hoses can withstand up to 8,000psi before bursting, so you'll have
a tough time kinking them, either intentionally or accidentally.
A full 20 oz CO2
tank gets very heavy and very quickly. So take your tank off your gun
and put it in a pouch or harness and connect your marker to your tank
with the remote line. You will quickly realize that you have just lost a
good deal of weight and gained a lot of mobility.
There are other benefits as well. Liquid CO2 will destroy your O-rings. The extra added length between the tank and the internals of your gun gives the CO2 more space to expand and greatly lessens the chance any liquid CO2
will enter your marker at all. The on/off valve allows you to turn off
the air supply so you can disconnect without wasting additional air. The
quick disconnect allows you to remove the remote line without
unscrewing the ASA adapter. This saves the O-ring wear that normally
occurs when removing your tank.
This remote works with CO2
and HPA applications. It has a 3500 psi working pressure with a 8,000
psi burst pressure. It will stretch easily to over 8 feet and quickly
recoil back to its compact position.
|
|
|
|
|
|
|