HK Army Paintball EVO Rotor/LTR Metal Speed Feed

Details:

• Fits on the Rotor and LTR



• Constructed of durable aluminum materials



• Four spring loaded fins allow paintballs to not break while loading the loader and strong enough to not allow the paintballs to fall out



• Secure spring loaded locking latch that prevents the lid from popping open



• Toolless hinge spring loaded locking system allows the speed feed to be installed with just a simple press of a button which activates the spring loaded hinge pins



• Patented technology

Directions:

• Remove the stock plastic lid from the loader by first removing the 5 silver screws located on the underside of the top shell. Once the screws are removed you can pull apart the exterior center area of the shell exposing the lid hinge pin assembly. Remove the silver hinge pin, spring and lid by pushing it to the side with a small allen key.



• Once the pin, spring and plastic lid are removed, reassemble the top loader shell with the 5 silver screws.



• The EVO Speed Feed can now be inserted into the hinge area of the loader by Pressing the spring loaded button downwards from the center of the "Press" button located on the underside of the Speed Feed. When the button is evenly pressed it will retract the left and right hinge pins. Line up the left and right pins and release the button. The spring loaded pins will then expand into the two hinge pin holes which will attach the Evo Speed Feed to the loader shell. (NOTE: No tools needed, Pins must be perfectly lined up with the holes for the Speed Feed to be fully secured to the loader)



• Once EVO Speed Feed has been attached to the hinge, close and lock the lid by pressing the back spring loaded locking button. Then the Speed Feed is ready to use.